How to carry out Fly Screen Repair in Adelaide?

Remove the screen from your window, as it will aid you in carrying out FlyScreen Repair in Adelaide. Now, lay your window screen or door screen on a broad flat surface. Keep the screen in such a spot that the screen spline is facing up.

After that, check carefully and find out the end of fly screen spline. Using a small pick or an awl, dig out the spline carefully. Pull out the old rubber screen spline from the frame channel, once you are sure that enough is exposed to firmly grip between your fingers. This is an important step while carrying out Fly Screen Repair in Adelaide.

Remove the old flyscreen from your window. Remove the flyscreen from the screen kit & center it so as to fit the ‘screen frame’. If you are making use of a screen roll, cut it allowing few inches on all sides of the frame. Cut the excessive screen once you have finished installing and making the screen center over the frame.

Now, insert the end of the replacement uncut rubber spline into one of the corners of the frame. Poke the spline into the ‘frame channel’ carefully with the help of a screwdriver. Poke a hole in the brand new screen. If the end of the spline is tucked into the frame channel, you’re ready to start with the spline roller.

The next step to Fly Screen Repair in Adelaide is to press the spline into the channel with the help of a spline roller, along one side of the frame. Stop pressing if you have reached the corner. In the corners, you will not be able to make use of the rollers and thus use the screwdriver to poke the spline into the corners of frame channel. While starting a novel side, pull the screening with somebody’s help. Continue it until you cover the frame channel with that rubber spline. When you have reached the last corner, from where you started, cut the edge of the spline and with the help of a screwdriver pack the end of the spline into the frame channel. Finally, firmly press the spline into the channel by running the roller over many a times till you are satisfied with the tightness of the screen. That concludes your Fly Screen Repair in Adelaide.

For expert help, call up Trade Focus Handyman!