Texture Coating on Adelaide homes

Texture Coating on Adelaide homes is essential. A home that is texture coated will be able to have a weather shield which will protect it from the rain, sun, heat, and mildew. Thus, it will lengthen the exterior's life a great deal. The texture coat is helpful in keeping the external temperature of the house lower which would mean savings on the electricity bill. While the process can be time-consuming, it is just easy to perform Texture Coating on Adelaide homes. It takes just some planning for days.

Inspect your Home's Exterior

This is essential so that you can check for damaged areas. While the texture coat proffers protection, this cannot aid a damaged area. Take note of such spaces.

Dig a Trench

The trench should be situated on your house's exterior. Such trench must reach around one foot away from your house and must have a minimum depth of ‘6 inches’. If your house's siding extends over ‘6 inches’, your trench must be about ‘3 inches’ below your siding's bottom.

Before Texture Coating on Adelaide homes wash it thoroughly

Your home must be pressure washed with a water solution and mild detergent. Ensure that you remove loose paint, mildew, dirt, mold and other contaminants.

Repair Damaged Areas

Make use of a similar substrate which is currently in place in repairing any damaged areas. When your house is wood, the surface should be repaired with wood; if it is siding, you can make use of siding in repairing the damaged spaces. Keep in mind that the appearance of the final coat can be compromised by changing your materials.

Cover Surrounding Landscaping before Texture Coating on Adelaide homes

You can make use of huge drop cloths in protecting the plants. Put the plastic sheets over your doors and windows while you secure the plastic using the painter's tape. This can protect the decorative & glass parts of your house.

Spray the Texture Coating Primer

You can begin with a coat of the primer material on the exterior of your house. The material is fairly thick so you must make an adjustment to the power sprayer until you are able to obtain the most wanted coverage. Make use of a piece of ‘plywood’ in spraying the primer until you get the needed outcomes. The texture coating primer has to be sprayed evenly across the home's surface through a broad sweeping motion so that you can keep away from the excess texture in some home spots and light textures in others. Allow the primer to dry for a couple of hours.

Apply Texture Coating on Adelaide homes

This kind of coating should be applied over the primer in order to give further protection. Again, make sure that you properly adjust the power sprayer in spraying the correct amount. In applying the coating material, make use of short and even strokes to get a uniform effect. Allow the material to dry for a couple of hours.

Paint your House's Trim Areas

You can do this by using a protective outdoor paint which coordinates or matches with your texture coating. Allow the paint to dry for 4 hours and take away the plastic sheeting from the windows and doors. Then, uncover your landscaping.